Electrostatic discharge effect on safe distance determination for 500 kV ac power line's helicopter inspection

The effect of electrostatic discharge on safe distance determination for 500 kV ac transmission line's helicopter inspection is investigated. Potential difference exists while helicopter is near the power transmission line, which is harmful to the inspection persons. The electric field in the helicopter cabin is calculated when it is near the power line. The result indicates that the potential difference becomes higher with the decrease of the distance between the helicopter and transmission line. Considering the discharge energy and the guarantee of the persons' safety, the safe distance for 500 kV ac transmission lines is determined as d ≥ 15 m.     

Nascent tar formation during polyvinylchloride (PVC) pyrolysis

Pyrolysis experiments of polyvinylchloride (PVC) were performed to investigate the effects of peak temperature, holding time, and heating rate on the formation of nascent tar. The nascent tar samples were collected using a wire-mesh reactor where the secondary reactions of the evolved volatiles were minimized. The small compounds, such as benzenes and alkanes, were not detected in nascent tar in wire-mesh reactor, whose components are quite different from those of other tars in tube type reactor and vacuum reactor. At a heating rate of 1000 K/s, the quasi-3 rings and 3 rings group aromatics were the major components in nascent tar; while the content of 2 rings group aromatics increased from 7.02% to 31.75% with increasing peak temperature from 500 to 800 °C. At a longer holding time of 300 s, an increase of 2 rings group aromatics from 7.02% to 50.33% was also observed for the nascent tar at 500 °C, indicating that the tar composition significantly changed at different stages of PVC pyrolysis. It seems that 3–4 rings compounds form in the early stage and then 2 rings compounds release in the later stage of PVC pyrolysis. Based on the experimental results in this work, a new four-stage mechanism, including (1) dechlorination accompanied with inner cyclization, (2) aromatic chain scission, (3) release of quasi-3 rings or 3 rings group, and (4) release of 2 rings group, of the PVC tar formation was proposed.     

Theoretical analysis of the performance of a single side band multicarrier source based on a re-circulating frequency shifter influenced by an optical bandpass filter

An optical bandpass filter （OBF） is an important element whose properties considerably influence the output performance of a single side band multicarrier source based on a re-circulating frequency shifter. The influence of the OBF in the loop on the output spectrum is theoretically analyzed. Numerical simulations and experiments are Mso carried out. Results show that the steepness and deepness of a nonflat-top filter influence the stability of the spectrum of an output multicarrier. To obtain multicarrier output with tone to noise ratio （TNR） 〉26 dB and error vector magnitude （EVM） 〈0.25, the steepness ratio of the filter should be greater than 0.75 and deepness should be larger than 0.99.     

Photo‐Degradable,Protein–Polyelectrolyte Complex‐Coated,Mesoporous Silica Nanoparticles for Controlled Co‐Release of Protein and Model Drugs

The fabrication of photo‐degradable, protein–polyelectrolyte complex (PPC)‐coated, mesoporous silica nanoparticles (MSNs) and their controlled co‐release of protein and model drugs is reported. Random copolymers composed of oligo(ethylene glycol) monomethyl ether methacrylate (OEGMA), and a photolabile o‐nitrobenzyl‐containing monomer, 5‐(2′‐(dimethylamino)ethoxy)‐2‐nitrobenzyl methacrylate (DENBMA), are first anchored onto the MSNs and then quaternary aminated, to obtain positively charged P(OEGMA‐co‐TENBMA) which exhibits photo‐induced charge conversion characteristics. PPCs consisting of P(OEGMA‐co‐TENBMA) and the protein bovine serum albumin (BSA) are utilized as capping agents for the nanopores of the MSNs. Upon UV irradiation, charge conversion of P(OEGMA‐co‐TENBMA) can lead to the disruption of PPCs on MSNs and co‐release of BSA and rhodamine B by electrostatic repulsion.     

Rapid and direct determination of glyphosate,glufosinate, and aminophosphonic acid by online preconcentration CE with contactless conductivity detection

Rapid and direct online preconcentration followed by CE with capacitively coupled contactless conductivity detection (CE‐C⁴D) is evaluated as a new approach for the determination of glyphosate, glufosinate (GLUF), and aminophosphonic acid (AMPA) in drinking water. Two online preconcentration techniques, namely large volume sample stacking without polarity switching and field‐enhanced sample injection, coupled with CE‐C⁴D were successfully developed and optimized. Under optimized conditions, LODs in the range of 0.01–0.1 μM (1.7–11.1 μg/L) and sensitivity enhancements of 48‐ to 53‐fold were achieved with the large volume sample stacking‐CE‐C⁴D method. By performing the field‐enhanced sample injection‐CE‐C⁴D procedure, excellent LODs down to 0.0005–0.02 μM (0.1–2.2 μg/L) as well as sensitivity enhancements of up to 245‐ to 1002‐fold were obtained. Both techniques showed satisfactory reproducibility with RSDs of peak height of better than 10%. The newly established approaches were successfully applied to the analysis of glyphosate, glufosinate, and aminophosphonic acid in spiked tap drinking water.     

Ionic liquid-modified silica as a new stationary phase for chromatographic separation

A new stationary phase based on silica modified with 1-methyl-3-propylimidazolium chloride was synthesized and characterized in this paper. A derivative of 1-methyl-3-propylimidazolium chloride was used to chemically modify the surface of silica particles to act as the stationary phase for HPLC. The modified particles were characterized by Fourier Transform Infrared (FT-IR), ¹³C NMR spectroscopy and thermogravimetric analysis (TGA). The surface modification procedure rendered particles with a surface coverage of 0.89 μmol/m² of alkylimidazolium chloride. Columns packed with the modified silica and blank silica particles were tested under HPLC conditions. Preliminary evaluation of the stationary phase for HPLC was performed using aromatic compounds as model compounds. The separation mechanism appears to involve multiple interactions including ion exchange, hydrophobic and electrostatic interactions.     

An experimental and computational investigation on the fragmentation behavior of enaminones in electrospray ionization mass spectrometry

The dissociation pathways of protonated enaminones with different substituents were investigated by electrospray ionization tandem mass spectrometry (ESI‐MS/MS) in positive ion mode. In mass spectrometry of the enaminones, Ar? CO? CH?CH? N(CH₃)₂, the proton transfers from the thermodynamically favored site at the carbonyl oxygen to the dissociative protonation site at ipso‐position of the phenyl ring or the double bond carbon atom adjacent to the carbonyl leading to the loss of a benzene or elimination of C₄H₉N, respectively. And the hydrogen? deuterium (H/D) exchange between the added proton and the proton of the phenyl ring via a 1,4‐H shift followed by hydrogen ring‐walk was witnessed by the D‐labeling experiments. The elemental compositions of all the ions were confirmed by ultrahigh resolution Fourier transform ion cyclotron resonance tandem mass spectrometry (FTICR‐MS/MS). The enaminones studied here were para‐monosubstituted on the phenyl ring and the electron‐donating groups were in favor of losing the benzene, whereas the electron‐attracting groups strongly favored the competing proton transfer reaction leading to the loss of C₄H₉N to form a benzoyl cation, Ar‐CO⁺. The abundance ratios of the two competitive product ions were relatively well‐correlated with the σ_p⁺ substituent constants. The mechanisms of these reactions were further investigated by density functional theory (DFT) calculations. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal analysis of CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript> nanoparticles using surfactants CTAB and F-68

A study concerned to thermogravimetric analysis is performed in cesium dihydrogen phosphate (CsH₂PO₄) that was synthesized, using cetyltrimethylammonium-bromide (CTAB), polyoxyethylene-polyoxypropylene (F-68) and mixture of (F-68:CTAB) with two mole ratio 0.06 and 0.12 as surfactant. The dehydration behavior of particles was studied using thermal gravimetric analysis and differential scanning calorimetric. Subsequently, the experimental results indicated that the first dehydration temperature in the range of 237–239 °C upon heating, the second peaks occur at temperature range 290–295 °C and overlapping in the thermogravimetric events is observed. The mass loss values are obtained in the range of 6.62–6.97 wt% that is less than reported theoretical value 7.8 wt%. These values show well compatibility of reaction CsH₂PO₄ to Cs₂H₂P₂O₇ with 3.92 wt% whereas mass loss value of CsH₂PO₄ to CsPO₃ is less than theoretical value 7.8 wt%. The activation energy of two steps dehydration are calculated using Kissinger equation for the samples synthesized via CTAB and (F-68) with minimum value mass loss 6.62% and maximum value mass loss 6.97%, respectively. The calculation results reveal that the reaction rate in the first step (CsH₂PO₄ → Cs₂H₂P₂O₇) is faster than the second step (CsH₂PO₄ → CsPO₃). The weight loss values of the samples demonstrate that existence of CTAB can be considered as effective factor which prevents more weight loss during the dehydration process.     

Determination of partition coefficient and analysis of nitrophenols by three‐phase liquid‐phase microextraction coupled with capillary electrophoresis

A three‐phase hollow fiber liquid‐phase microextraction method coupled with CE was developed and used for the determination of partition coefficients and analysis of selected nitrophenols in water samples. The selected nitrophenols were extracted from 14 mL of aqueous solution (donor solution) with the pH adjusted to pH 3 into an organic phase (1‐octanol) immobilized in the pores of the hollow fiber and finally backextracted into 40.0 μL of the acceptor phase (NaOH) at pH 12.0 located inside the lumen of the hollow fiber. The extractions were carried out under the following optimum conditions: donor solution, 0.05 M H₃PO₄, pH 3.0; organic solvent, 1‐octanol; acceptor solution, 40 μL of 0.1 M NaOH, pH 12.0; agitation rate, 1050 rpm; extraction time, 15 min. Under optimized conditions, the calibration curves for the analytes were linear in the range of 0.05–0.30 mg/L with r²>0.9900 and LODs were in the range of 0.01–0.04 mg/L with RSDs of 1.25–2.32%. Excellent enrichment factors of up to 398‐folds were obtained. It was found that the partition coefficient (K_a/d) values were high for 2‐nitrophenol, 3‐nitrophenol, 4‐nitrophenol, 2,4‐dinitrophenol and 2,6‐dinitrophenol and that the individual partition coefficients (K_org/d and K_a/org) promoted efficient simultaneous extraction from the donor through the organic phase and further into the acceptor phase. The developed method was successfully applied for the analysis of water samples.